Skip to main content

WSUS Internal Server Problem and System Center 2012 R2 DPM Issues

Encountered two issues today that need to be noted real quick:

  1. WSUS was giving me a ton of problems with not updating on client machines. Error after error, and I was completely puzzled because I had everything configured correctly. Turns out Microsoft change their port in WSUS from 80 to 8530, so in your internal addressing, you have to add that like this to make it work:
    http://wsusserver:8530
  2. System Center 2012 R2 DPM was giving me problems with Replica Inconsistencies. So to fix this, I updated it, and found out that Windows Server Backup feature needs to be installed along with Visual C++, and possibly WinRE disabled. Links below.

 

Sources:

http://www.tech-coffee.net/replica-is-inconsistent-in-dpm-2012r2/

http://www.microsoft.com/en-us/download/details.aspx?id=30679

http://www.itnotes.eu/?p=1203

Skill Atrophy

One of the greatest threats to a young IT professional is skill atrophy. You work hard at developing a skill set over a given period of time, and you even go so far as to earn a certification in such a skill set — and then you quit using it.

The old appropriate is appropriate here: “Use it or lose it.”

Recently while working at a site, and much to my frustration, my skills in router and switch configuration — even just layer 2 and 3 protocols — had started to atrophy because I hadn’t touch a device in five months — then bam! I’m setting up not just layer 5-7 devices, but I’m also setting up layer 2 and 3. I’ve been working so long in the higher layers that I started to forget basics in layer 2 and 3.

 

Layer 3 Switch

 

The hard part is that it was something rather ridiculous. It was a layer 3 switch, and turned the gateway port into a routed port instead of a switched port, thinking that I would separate out a server farm from the layer 2 network that it was attached to through that port. Nothing was getting DHCP requests on this switch and it was frustrating me to no end, not to mention I had to local techs looking over my shoulder and just standing there wondering what was going on! In the end, it was by getting help from my boss and co-worker that lead me down the road to figure out what I had been doing wrong.

So how does one prevent skill atrophy? The obvious answer is to practice, but that may not always be an option, especially if you’re in an environment where the work constantly changes and you’re insanely busy (that’s my excuse at least). Perhaps doing Packet Tracer simulations — for CCNA folks like myself — would be really helpful here.

Another idea is just good documentation, even trying to take a snapshot in time to see what you were doing. Copy your configs and annotate the configs to explain what the heck you were thinking — even encouraging this at your company so that other techs, or future techs, can get an idea of what’s going on.

Asking for help is always an option, especially if you’re really stumped. Time wasted can never be taken back (it’s a sunk cost), so realizing you’re failing bad early on can help mitigate future problems. To quote Freakonomics writer Steve Levitt, “Fail quickly.” However, at the same time, realize your failure is also a learning and/or reinforcement opportunity and will make you a better IT professional.

And of course, there’s also a good IT professionals google-fu, but you should be relying on that constantly, otherwise, are you learning any of this stuff?

All this being said, I’ve learned my lesson and I’m better because of it.